Conserving water is good for the environment, your community, and your wallet. Let’s look at some simple ways to save water at home.

8 Ways to Save Water

1. Turn the Water Off Whenever Possible

Turn off the tap while you are brushing your teeth. The running water is being wasted down the drain. Wet your toothbrush, then turn off the water. When you need to rinse, turn it back on. Do the same with shaving and washing your face. These simple habit changes can save hundreds of gallons a month.

2. Take Shorter Showers to Save Water at Home

On average, most American showerheads have a flow rate of 2.1 gallons per minute. If you take a 20-minute shower, you use 42 gallons of water. Cutting your shower time down to 10 minutes will save over 20 gallons of water every time you shower. Save even more water by setting a timer for 5 minutes.

3. Reuse Cooking Water

Another way to save water at home is to reuse cooking water. When you cook pasta or wash vegetables, drain the water into a separate pot or bucket. Use it to water your garden or to flush the toilet.

4. Replace Your Showerhead to Save Water

If you have an older home, you may have showerheads with flow rates of up to 5 gallons per minute. Replace those showerheads with low-flow models that use less than 2 gallons per minute to cut your water usage down significantly. This is an easy DIY upgrade.

5. Install a New Toilet

Older toilets use up to 7 gallons of water per flush, which is a lot more water than newer models. Today’s low-flow toilets are required by federal regulation to use less than 1.6 gallons per flush. If replacing your older toilet isn’t in the budget, place a jug of water, with a few pebbles inside, into the tank. This can save up to 10 gallons every day.

6. Save Water at Home by Fixing Leaks Promptly

Fixing leaks is an obvious solution for saving water at home. Every drip out of a faucet is lost water. Every leak between the toilet tank and bowl means a higher water bill. Inspect your dishwasher and ice maker hoses. Repair dripping faucets and leaking toilets. Fix plumbing leaks as soon as possible to save water and money on your utility bills.

7. Run Full Loads

Don’t run the dishwasher or washing machine without a full load. A load of laundry or a load of dishes will use water no many how many pieces you add to the load. Running full loads means fewer loads and less water usage.

8. Save Water at Home by Repurposing Excess Water

When you are waiting for the shower or bath water to heat up, use a bucket to catch the water from the faucet. Set it aside and use it to water the flowers, bathe the dog, or scrub the floor.

Altamont Inspections offers home inspection services in Western North Carolina. Contact us to request an appointment.